iqubx jetline WS54 modular partition system for workstations
Workstation Modular Partition Systems
Workstation Modular Partition Systems are used to create screens on continuous linear workstations – shared and non-shared, or to create cubicles for isolated senior executives.
Why do we need Workstation Modular Partition Systems
The screens thus created, provide a degree of privacy for the individual to work effectively and thus contribute to the productivity. Psychologically, it also addresses the individual need to demarcate personal space, which can then land itself to personalization as well.
The workstation modular partition systems, do not just act as privacy panels but have to perform many other functions like provide conducive acoustic environment as well – right degree of sound isolation and prevention of echo. For this the Workstation Modular Partition Systems may be lined with fabric panels, or still better, soft boards or cork boards which also act as pin boards to pin important documents etc. However, these days, lacquered glass boards are also preferred and a mix of fabric and glass finishes may be used to create right aesthetic, functional and acoustic system.
These Workstation Modular Partition Systems also have to act as, or incorporate, cable raceway to route the electrical and data wire efficiently,and should be suitable for mounting the varied switch sockets to interface with the equipment on the work table.
Types and sizes of Workstation Modular Partition Systems
The main workstation spine is typically taken to be of a certain minimum thickness, ideally above 50mm, to allow mounting of switch sockets on the panels themselves. However, this is not sacrosanct, as many a times, raceways are taken in design and fliptop box or popup box can be used to access the power and data right on the workstation counter top, or alternatively, the switch sockets may be mounted on underlying raceway. In these situations, both, the spine as well as the lateral partitions can be thinner.
iqubx jetline WS54 countertop modular partition system for workstations
These Workstation Modular Partition Systems can be used right from floor level to 1200 mm or 1350 mm or even 1500 mm as per design by the architect or interior designer or client preference, or sometimes, may be kept lower to just 1050 mm. In open office schemes, the Workstation Modular Partition Systems are typically mounted on counter top only and a separate apron may be mounted below counter or even left open below counter.
Finishes for Workstation Modular Partition Systems
Usually a mix of materials are used to finish the Workstation Modular Partition Systems. These may be laminate finishes – prelaminated or post laminated boards, or fabric finished, soft board, cork board, lacquered glass (magnetic and non-magnetic).
Workstation Modular Partition Systems WS54 Jetline
iqubx jetline WS54 modular partition system for workstations
Iqubx Jetline WS54 modular partition system for workstations is a very sleek and sturdy 54 mm thick modular partition for workstations or other screen walls, or even full height partitions. These partitions are green certified by IGBC, CII, as they are designed with minimum components for better logistics and wastage management. They have provision for internal wiring.
jetline partition system assembly
This workstation modular partition system can be interlocked in continuity to create long workstations – both counter top as well as full partitions, and in 90 degree to create L shaped or T shaped seating configurations.
It can incorporate soft board, prelaminated panels 12 mm thick on both faces, or lacquered glass (magnetic / non-magnetic).
They are ideal to be use along with green certified and innovative IQUBX aluminium table leg systems for workstations and meeting tables.
Specifications for WS54 Jetline
WS54a top finishing section 54 x 8 mm
DWP01e multipurpose snap fit 10 mm
WS54b main section 54 x 8 mm
WS54c partition continuation connector
WS54d partition 90 deg connector
WS54EC1 plastic ABS end cap
Raw mill / Powder coat / Anodized
Green pro certified by IGBC, CII
6063 aluminium alloy, 100% recycled aluminium – 10% pre-consumer & 90% post-consumer
Workstation Modular Partition Systems WS28 Airline
iqubx airline WS28 modular partition system for workstations
WS28 Airline Workstation Modular Partition System is remarkable for its simplicity. With minimum number of component it has just 28 mm thickness.
They can be used for making screens, table top partitions and aprons for desking systems as well as full modular partitions – for both – main spine as well as lateral partitions. These workstation modular partition systems are green certified by IGBC, CII.
ws28 modular partition countertop and rear mounted for nonshared workstations
ws28 modular partition cubicles
They are ideal to be use along with green certified and innovative IQUBX aluminium table leg systems for workstations and meeting tables.
These Workstation Modular Partition Systems can be interlocked in continuity and 90 degree to form straight, L shaped and T shaped seating configurations.
airline partition system assembly
ws28 iqubx modular partition assembly
The partition can incorporate soft board, prelaminated particle board 25mm thick or lacquered glass (magnetic / non-magnetic) both sides or combinations as per requirements.
Specifications for WS28 Airline
WS28a main section 28 x 14 mm
WS28b end section 28 x 17 mm
WS28c partition 90 deg connector
WS28EC1 plastic ABS end cap 1
WS28EC2 plastic ABS end cap 2
Raw mill / Powder coat / Anodized
Green pro certified by IGBC, CII
6063 aluminium alloy, 100% recycled aluminium – 10% pre-consumer & 90% post-consumer
For more information on the products and placing orders
Call +91 9999001967, 8506074444, 7065444402
Or email at info@iqubx.com and amit@iqubx.com
Visit our site www.IQUBX.com to check out more products
We wish to tie up in India and other countries for marketing these products. Please connect with me for collaborations.